The debugging method of concrete mixer in asphalt mixing plant

oncrete mixer is a mix of cement, sand and gravel aggregate and water and mix made of concrete machinery, concrete mixer debugging problems, in the process of the use of concrete mixing plant is very critical, normal operation of equipment can directly affect the concrete mixing station. Is widely used in commodity concrete mixing station, pipe pile, component, hydraulic, concentrated stirring places such as concrete, and according to different technical requirements and actual needs to carry on the design and manufacture, make every (set) devices have distinct professional quality.

Debugging problem of concrete mixer of asphalt mixing plant.

1. The setting of concrete mixer should be reasonable. Power supply voltage: 380v with extra voltage, error is plus or minus 10%. The wiring of the motor and electrical components can be secure, and the distribution box housing should be grounded firmly. It is necessary for the power supply zero to be delivered to the terminal board of the distribution box. All pipelines should be properly settled in case of any trouble during the operation.

2. Check the project regularly. Check the concrete mixer and smooth parts of smooth parts regularly. Check the starting and mixing motor of the strong mixer regularly. The direction of the two and half shafts should be in the direction of the direction of the sign. If the direction is wrong, switch the power wiring

3. Discharge the discharging organization, the unloading door open and closed should be in place accurately. Pump water pump, water supply system should work normally; Determine the water supply according to the required concrete ratio, and adjust the time relay to the corresponding water supply time. Work on mixing motor.