Nanyang road machinery small and medium sized commodity concrete mixing station safe production of nine necessary measures

Nanyang road machinery jintuo engineering machinery co., LTD., as a professional manufacturer of concrete mixing station, summarizes the nine necessary measures for the safe production of small and medium-sized concrete mixing stations:

, small and medium-sized commercial concrete mixing station installation, all piping must be properly placed, in case you fall over a crush or injury at work, cause an accident, xinji, after using a machine-team will on each bolt and steel wire rope clip screen for review.

2. Before the internal inspection, the air switch must be disconnected and the designated person will be assigned to guard the accident prevention.

3. Check the main switch button of the control console and the accuracy and reliability of the indicator.

Four, small and medium sized concrete mixing station, no one may enter ascending hopper rail or stand under the track, must enter the hopper should be promoted to a safe place, and safety rope to live, to ensure safety.

The foundation must consider drainage, not water.

6. Check whether the upper and lower limit switches are safe and reliable.

7. It is strictly prohibited to stand or put sundries in the area of hopper work, in case of accidental injury.

8. When stirring, it is strictly forbidden to stop, if a power failure occurs in the middle of the road, the press button should be pushed out immediately, open the door of the material, and put the mix in the mixing tube to prevent the hard knot.

9. If the installation is higher than the surrounding buildings, the lightning protection facilities shall be installed.